Receivers & Amplifiers

Most Popular

Name: A to Z

Name: Z to A

Price: Low to High

Price: High to Low

Highest Customer Rating

Default Dev Script Validation

Default Header After Global Promotions

At 150 watts of power for the A2150 and 50 watts for the A1250, plus the ability to consistently drive a 4-ohm load, this is a workhorse that can be used as a building block in any system. Its automation and protection circuits serve to make it perfect ch

Origin Acoustics® Foundation 12 Channel Stereo Amplifier

Great sound and durability are the hallmarks of Origin amplifiers. For your system, regardless of its size or complexity, amplification is the critical tool that needs to perform all the time, every time. These amplifiers resoundingly answer the call.

At 150 watts of power for the A2150 and 50 watts for the A1250, plus the ability to consistently drive a 4-ohm load, this is a workhorse that can be used as a building block in any system. Its automation and protection circuits serve to make it perfect choice for home theater or multi-room/multi-zone applications.

This switching type amplifier class has incredible efficiency, above 90%, as higher power is demanded. This means substantially less heat is produced even though the amplifier is able to produce substantial power. This also means a reduction in size as smaller heat sinks are required and the electronic circuitry can be more compact and reside in a smaller chassis.

Bridging two channels into one drives almost triple the power into a single output. This feature creates greater flexibility in system design when additional power is a requirement.

Origin amplifiers can be place in a rack or inside furniture and require no direct access to function. They are turned on out of standby mode either by sensing the audio signal from a preamp or receiver or by a 12-volt signal from any number of components. They also have a 12-volt output to trigger other components as necessary.

Built-in circuits that sense both thermal overload or a short-circuit in the speaker connections, will shut down the amplifier until the temperature level returns to normal operating levels or the short in the connections is corrected. This protects the amplifier from permanent damage and avoids costly service visits and repairs.

Analog Audio(RCA) Output:

Power Off Consumption (watts):

Bridged Power per Channel:

Signal to Noise Ratio:

Watts RMS per Channel (4-ohms):

Watts RMS per Channel (8-ohms):

The DSP3-150 is the ideal amp for situations where a passive subwoofer and multi-speaker channels are required. The dedicated 300w 8-ohm subwoofer channel has ample power to push passive subwoofers to their peak.

Origin Acoustics® Power Amplifier

Origin Acoustics has made a conscious choice to pursue three-channel amplifiers as our preferred solution for installations that involve multiple in-line full-range speakers and passive subwoofers. By giving the subwoofers their own dedicated channel, not only is there more control over the environment, but one additional subwoofer can be added to the channel without impedance restrictions.

This amplifier has an easy-to-use control knob and front-facing panel. Preloaded with DSP settings for our most popular configurations and loudspeakers, this amplifier is a must-have when installing 8-ohm outdoor audio or in-ceiling sub/sat systems.

The amplifier is on when you need it and off when you don’t. The DSP3-150 is turned on out of standby mode either by sensing the audio signal from a preamp or receiver or by a 12-volt signal from any number of components.

The input channel features a stereo loop out to ensure connection to other amplifiers is straightforward and easy.

The DSP2-200 provides uncolored, clean amplification to loudspeakers rated from 4-ohms and up. It contains preset DSP curves for Origin Acoustics products and is ready for installation into a rack or inside a cabinet.

The DSP2-200 provides ample power in a small frame. With an easy to operate rotary dial for DSP control, and 200w of power on each channel, these are ideal for 8-ohm landscape, subwoofers, or stereo listening.

Half rack width and 1U height make it easy load four of these into roughly the same space as a single traditional amplifier.

Many consumer electronics just don't put enough volume out to drive a high-fidelity amplifier to its peak performance. That's where the PA15 comes in. Add the module into your chain, and adjust the output as needed.

Origin Acoustics® Foundation 2 Channel Preamplifier

Gain staging, or gain structuring is the act of setting the gain for each amplification stage (gain stage) in a sound system to achieve a target system volume that minimizes noise and distortion. Said another way, proper gain staging gives your sound system the best signal-to-noise ratio. By attempting to reach the loudest peaks possible (without clipping) at each stage, you can obtain an ideal gain structure, but to do this, you need to consider each part of your system and understand the principles involved.

Gain staging is the art of setting the volume for each stage of amplification to minimize noise and distortion. While this is a fundamental concept for live sound and recording, it does apply to custom integration as well. Ideal gain staging ensures your sound system achieves the best signal to noise ratio. The goal is to maximize the volume at each point in the chain without clipping. EG: If you have an iPad, a PA15, and an A2150 amplifier, you have three ways to control the gain. One primary way to start this process is to max the volume on your input device, set the amplifier trim at roughly 50%, and then adjust the PA15, up to approximately 80%, until you have achieved the max-loudness your client requires.

If you're still unable to produce enough dB, then adjust the trim on the amp. Just be aware that when you raise the volume on the amplifier or the PA-15, you are increasing the noise floor, which is the amount of signal noise created by all the equipment. So, we recommend only using your pre-amplifiers and amplifiers up to around 80% of their max volume. And while we are proud of the low signal to noise ration of our amplifiers, this best practice will also help prevent clipping when your client maxes the system input out.

The Origin PRO 2RU amps offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs.

Origin Acoustics® Pro Amp 2 Channel Power Amplifier

The required power can be utilized where needed – with both Hi-Z and Low-Z simultaneously, to fit all needs, and all easily set up through the Web App user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or Low-Z to cover any room size.

PROA1000 & PROA1200 Amplifiers are 2RU Class-D amplifiers, ideal for installer projects that require high-performance, advanced audio output.

Our robust Origin PRO amplifier web app arrives built into the amp, to offer a fully personalized DSP configuration for any audio/voice system in a context requiring the most advanced multi-zone audio set up. Quickly accessed from any device or browser, the Origin PRO interface directly links to the amp’s own Wi-Fi or RJ45 network port, and navigation through the seamless user interface will allow the most complex system to be set up effortlessly in minutes.

State of the art technology makes it a piece of cake to create your unique configurations while efficiently integrating the most demanding audio/voice systems. Capable of reliably handling numerous DSP configurations, while offering an extensive scope of tuning capabilities and features: the app enables multi-zone setup, input mixing, priority and ducking, restriction, input and output EQ, S/PDIF output routing, high-pass filter, speaker management and presets, delay, wall controller configuration, sine generator, and more.

Origin Acoustics® Pro Amp 4 Channel Power Amplifier

The Origin PRO 1RU amplifiers offer a combination of small size and high power per channel flexibility, making them ideal for installing in commercial applications which demand a variety of outputs.

The required power can be utilized where needed – with both Hi-Z and Lo-Z simultaneously, to fit all needs, and all easily set up through the Origin PROTM amplifier web app user interface. Personalize your system to deliver the power required, with 1-2 channels in Hi-Z or 2-4 in Lo-Z to cover any room size.

The PROA125 & PROA250 amplifiers are 1RU Class-D amplifiers, ideal for installer projects with particular space restraints that nonetheless still require high-performance, offering both exceptionally compact half rack design (2 and 4 Channel Series) and advanced audio output.

Meanwhile, our robust Origin PRO amplifier web app arrives built into the amp, to offer a fully personalized DSP configuration for any audio/voice system in a context requiring the most advanced multi-zone audio set up. Quickly accessed from any device or browser, the Origin PRO interface directly links to the amp’s own Wi-Fi or RJ45 network port, and navigation through the seamless user interface will allow the most complex system to be set up effortlessly in minutes.

Origin Acoustics® Foundation Collection 3-Channel 500W Amplifier with switch mode power supply and is a class D amplifier

Origin Acoustics® Foundation Collection 3-Channel 500W Amplifier

The DSP3 amplifiers are highly flexible and intelligent digital audio 3 Channels Class D power amplifiers. The DSP3-700 amplifier delivers up to a total of 2,100W@4O or able to drive 70/100V constant voltage lines. All setup parameters for input/output processes and DSP features are accessible by using the remote PC software. Each DSP3-700 comes preloaded with up to 64 DSP presets to optimize it for use with all of Origin Acoustics’ speakers and subwoofers assuring peak performance.

Receivers & Amplifiers

Origin Acoustics® Foundation 2 Channel Preamplifier

$98.90

Origin Acoustics® Foundation 12 Channel Stereo Amplifier

$1,720.00

Origin Acoustics® Foundation Collection 3-Channel 500W Amplifier

$2,900.00

Origin Acoustics® Power Amplifier

$1,515.75

Origin Acoustics® Power Amplifier

$1,075.00

Origin Acoustics® Pro Amp 2 Channel Power Amplifier

$2,096.25

Origin Acoustics® Pro Amp 2 Channel Power Amplifier

$2,311.25

Origin Acoustics® Pro Amp 2 Channel Power Amplifier

$913.75

Origin Acoustics® Pro Amp 2 Channel Power Amplifier

$1,236.25

Origin Acoustics® Pro Amp 4 Channel Power Amplifier

$2,956.25

Origin Acoustics® Pro Amp 4 Channel Power Amplifier

$3,278.75

Origin Acoustics® Pro Amp 4 Channel Power Amplifier

$1,290.00

Origin Acoustics® Pro Amp 4 Channel Power Amplifier

$1,773.75

Is It Time To Plan Your Next Great Project? Great projects start with great plans! Let our team of experts find the right solutions to meet all your needs, for projects from residential to commercial. Send us your details below, and one of our friendly and knowledgeable professionals will reach out.

solutions

info

contact

hours

connect

associations